Network Rail Case Study New Overhead Line Equipment
Network Rail Case Study: The successful trial of the new
A broad range of available from 10mm – 250mm busbar diameter consisting of full short Circuit tested and being National Grid approved.
Home » Substation Earthing » Substation Line End clamps
Line End Clamps are precision manufactured from robust aluminium castings with high-grade stainless-steel fittings.
All clamps, whether sprung loaded or not, should be applied using an operating socket attached to an insulated operating pole. The design of all Line End clamps is such that once hooked onto the busbar they become self- supporting whilst the operating screw is tightened or loosened.
PBwel design and manufacture a broad range of Substation Portable Earthing clamps for many applications. All types, whether sprung-loaded or not, should be applied using an operating socket attached to an insulated operating pole.
Substation Portable Earthing clamps should be inspected at regular intervals and before each application. All clamps should operate freely, and moving parts should be lightly lubricated, springs should be protected by heavy grease, and contact faces should be clean.
Get in touch with one of the team
Unit 1, Leafield Way, Leafield Ind. Est. Corsham, Wiltshire, SN13 9SW
Network Rail Case Study: The successful trial of the new
Introducing the Brand New PBwel Website Welcome to the new
Unit 1, Leafield Way, Leafield Ind. Est. Corsham, Wiltshire, SN13 9SW
© PBwel. 2020.
Registered company number: 10527362