WD6BD3 VOLTAGE DETECTOR

PBwel is the leading designer, manufacturer and supplier of quality electrical safety products.

WD6BD3 VOLTAGE DETECTOR

The PBwel three models of WD6B/D3 live line tester are available for use between 5-12kV, 10-36kV and 50-140kV. The circuitry is housed within the tubular body. The sound LEDs’ on-off switch and test button are mounted on an oval plate facing the operator. 

When the unit is switched on an intermittent tone will start and the LEDs will flash in synchronisation. The entire circuitry is verified by pressing the test button. If the unit is functioning correctly the tone will become constant and the light steady. 

When the test button is released, the tone and LEDs will immediately revert to an intermittent signal, which operates until the unit makes contact with a live source or is switched off. The detector should be tested before an operation. It is also possible to verify the detector using a separate proving unit, type MD, which can be ordered separately.

The WD6B/D3 live line tester must be mounted on an operating pole which is available separately. Various connection adaptors are also available; however, the basic unit is designed to be mounted on the top section of a U.K. standard operating pole. The pole head type should be advised if only the detector is to be supplied.

The number of pole sections to be used with the detector as a minimum will depend upon the voltage to be tested and the type of pole used. Periodically, it will be necessary to change the battery in the detector. The battery compartment is located in the bottom of the tubular body, below the label and can be released by removing the nylon screw.

Contact us for the full technical details using the button below.

PRODUCT BENEFITS

  • Visible and audible detection
  • Suitable for fitting to standard Operating Pole Sections
  • Test facility
  • Battery operated
  • Rugged construction
  • Available for 5-12kV, 10-36kV and 50-140kV

WD6B/D3A 5-12kV Part Number:                        EFV-17000

WD6B/D3B 10-36kV Part Number:                      EFV-17001

WD6B/D3C  50-140kV Part Number:                  EFV-17002

WD6B/D3D 90-245kV Part Number                    EFV-17003

 

 

See our other products

PBwel is the leading designer, manufacturer and supplier of quality electrical safety products.

PBwel is a globally recognised designer, manufacturer and supplier of temporary portable earthing, voltage detectors, Buchholz relays and electrical safety products.

With a heritage spanning over eighty years, and world-class experience in equipment designed for the safe maintenance of power systems, PBwel provides customers with high-quality service, reliable solutions and technical expertise.

 

Product enquiry form

Address(Required)
Would you like to be contacted by our team to arrange a free on-site demonstration and to find out more about this product?
This field is for validation purposes and should be left unchanged.

Or you can call the team using the below button