TAG780 RPFE

PBwel is the leading designer, manufacturer and supplier of quality electrical safety products.

TAG780 RPFE

This device is used for detecting AC/ DC voltage. With a control voltage level from 5 to 1000V, a red-light indicator for hazardous voltage is visible at all angles, a bright display with large figures for voltage reading and a dedicated display for each function.

Use

The Low Voltage Detector allows the following functions to be implemented on both
indoor and overhead installations:

  • Check for the proving dead operation
  • Control voltage levels from 12 to 1000V
  • Discrimination AC/DC
  • Polarity test on DC voltage
  • Discrimination phase / neutral
  • Phase indication (unipolar)
  • Phase rotation
  • Continuity check
  • A functional self-test is performed which turn on all LEDs and emits an audible signal

Advantages

  • The new generation of display, ultra-bright
  • High-brightness LEDs, visible in full light and indirectly
  • Cable with double insulation silicone: robust and highly flexible (no memory effect), length 1 m ~
  • Display up to 1000 V
  • Lightening of the measurement point
  • Protection without fuse: The device can be used in case of overvoltage

Technical Specifications

  • Response time less than 0.5 s
  • Voltage DC display two diodes polarity (+ or -)
  • Control the direction of rotation phase “2 wires” for three-phase, voltage rating equal to or greater than 100 V
  • Integrated self-test
  • Continuity test (below 80 Ω)
  • Unipolar phase checking (available on each probe)
  • Lightening of the measurement point
  • Type “outside”, can be used in rain
  • Clear and permanent marking
Nominal voltage rate:12 V to 1000 V AC/DC
Nominal frequency range f:15 to 60 Hz
Overvoltage category:CAT IV 1000 V
Duty cycle:ON = 30s / max OFF = 240s mini
Audible differentiated:Intermittent voltages up to 230V and from 400V continuous
Protection class:IP 65, IEC 60529 (DIN 40050)

Accessories

  • 2 x LR03 1.5 volt alkaline (AAA)
  • Delivered in carrying case
  • Instruction for use on the back of the bag
Reference Dimensions
TAG780RPFE280 x 70 x 50 mm

Contact us for the full technical details using the button below.

 

See our other products

PBwel is the leading designer, manufacturer and supplier of quality electrical safety products.

PBwel is a globally recognised designer, manufacturer and supplier of temporary portable earthing, voltage detectors, Buchholz relays and electrical safety products.

With a heritage spanning over eighty years, and world-class experience in equipment designed for the safe maintenance of power systems, PBwel provides customers with high-quality service, reliable solutions and technical expertise.

 

error: Content is protected !!

Product enquiry form

Address(Required)
Would you like to be contacted by our team to arrange a free on-site demonstration and to find out more about this product?
This field is for validation purposes and should be left unchanged.

Or you can call the team using the below button