SPCC140WI POWER CABLE SPIKING AND CUTTING TOOL

Hydraulic Spiking and Cutting Tool

Function

• SPIKING cable to check and ensure the absence of voltage on LV and MV underground cables
• Cutting after spiking operation in full safety
• Total security for the user according to NFC 18510

The PICOUP ultra-safe are integrated electrohydraulic cable cutters without hydraulic hose to check the absence of voltage on underground power cables. Use the following cables:

Uses

• 2 actions combined into one single tool (spiking and cutting)
• Enables the user to limit any resulting short circuit to a single-phase / ground fault when spiking multi-core cables. This causes any protective devices to trip before a 2 or 3 phases fault can be created
• In the event of spiking a live cable, the spiking blade can be replaced easily (minimising cost impact)
• MOS INDUSTRIE: 20 years of expertise
• No physical connection between the tool and the user
• Damage to infrastructure is minimised when spiking as a single phase to earth fault is created using a dedicated, local 70mm copper earthing cable
• Cutting failure sensor
• Indication on the remote at the end of the cutting operation
• Hydraulic over-pressure safety valve
• Battery charge status indicator
• Prevents the start of cutting if the battery is low

Specifications

• Reference Number: SPCC140WI
• Cutting capacity: diameter 140 mm
• Metal armour: round wires 4mm
• Cutting force: 21 000kg
• 24V DC operation
• Autonomy: 20 cuts
• Dimensions L x W x H: 678x188x320 mm
• Weight: 20 Kg

Contact us for the full technical details using the button below.

See our other products

Components & Accessories