MTAG X FOR 1 – 69 kV VOLTAGE DETECTOR MULTI RANGE

This Go No Go Contact voltage detector is designed for “proving dead”, making sure that nominal voltage is actually absent on a circuit of an HV’s distribution system, It’s two operating ranges are calibrated according to IEC recommendations between 1 kV and 69 kV:

• The device will detect any nominal voltage in contact with the part of the installation to be tested on overhead lines and substations.
• It will not indicate voltage presence when detecting induced voltages in order to allow grounding operations.

Advantages

Up to 3 in 1: This multi-range detector acts as up to 3 voltage detectors with 3 separated ranges: Lower range, median range and upper range.

An optimised indicator that can be understood clearly in all working conditions

• The visual indication is visible in all usual working environments, in sunlight or fog, with a wide-angle of visibility and from the side thanks to an optic ring.
• The 100 dB sound signal is designed to remain audible even in traffic or strong wind, thanks to its acoustic “

Direct access to the battery and sealed electronics compartment when the battery is replaced, this design prevents the following:

• Accidental interchange of housing or circuitry.
• Damage to electronic circuits.
• Humidity ingress into the device when the battery is replaced outdoors.

The selected voltage range is carried out and indicated as shown below:

Contact us for the full technical details using the button below.

See our other products

PBwel is the leading designer, manufacturer and supplier of quality electrical safety products.

PBwel is a globally recognised designer, manufacturer and supplier of temporary portable earthing, voltage detectors, Buchholz relays and electrical safety products.

With a heritage spanning over eighty years, and world-class experience in equipment designed for the safe maintenance of power systems, PBwel provides customers with high-quality service, reliable solutions and technical expertise.