I

P&B

MTAG FOR RAILWAY NETWORK 25 kV VOLTAGE DETECTOR

We are PENTA, a multinational industrial leader, pioneer, and expert manufacturer of electrical safety solutions, committed to ensuring your safety at every intervention.

MTAG FOR RAILWAY NETWORK 25 kV VOLTAGE DETECTOR

These voltage detectors are designed to make sure that nominal voltage is actually absent on a circuit in an HV distribution system between 1 kV and 69 kV (no-voltage verification):

  • The device will detect any nominal voltage on over headlines and stations.
  • It will avoid detecting most induced voltages in order to allow grounding operations.

Advantages

Optimised indicators that can be understood clearly in all working conditions:

  • The visual indication is visible in all usual working environments, in sunlight or fog, with a wide angle of visibility and from the side thanks to an optic ring.
  • The 100 dB sound signal is designed to remain audible even in traffic or strong wind, thanks to its acoustic horn.

Direct access to the battery and sealed electronics compartment. When the battery is replaced, this design prevents the following:

  • Accidental interchange of housing or circuitry;
  • Damage to electronic circuits;
  • Humidity ingress into the device when the battery is replaced outdoors.

Contact us for the full technical details using the button below.

 

See our other products

 

Product enquiry form

Address(Required)
Would you like to be contacted by our team to arrange a free on-site demonstration and to find out more about this product?
This field is for validation purposes and should be left unchanged.
Or you can call the team using the below button