MTAG FOR 1 - 69 kV VOLTAGE DETECTOR

PBwel is the leading designer, manufacturer and supplier of quality electrical safety products.

MTAG FOR 1 – 69 kV VOLTAGE DETECTOR

These voltage detectors are designed for “proving dead”, making sure that nominal voltage is actually absent on a circuit in an HV distribution system between 1 kV and 69 kV (no-voltage verification):

  • The device will detect any nominal voltage on overhead headlines and stations.
  • It will avoid detecting most induced voltages in order to allow grounding operations.

Advantages

Optimised indicators that can be understood clearly in all working conditions:

  • The visual indication is visible in all usual working environments, in sunlight or fog, with a wide-angle of visibility and from the side thanks to an optic ring.
  • The 100 dB sound signal is designed to remain audible even in traffic or strong wind, thanks to its acoustic “horn”.

Direct access to the battery and sealed electronics compartment. When the battery is replaced, this design prevents the following:

  • Accidental interchange of housing or circuitry;
  • Damage to electronic circuits;
  • Humidity ingress into the device when the battery is replaced outdoors.
Reference:MTAG0310FCUA, Voltage Range 3 – 10 kV, Frequency 50 / 60 Hz
Reference:MTAG1036FCUA, Voltage Range 10 – 36 kV, Frequency 50 / 60 Hz

Contact us for the full technical details using the button below.

 

See our other products

PBwel is the leading designer, manufacturer and supplier of quality electrical safety products.

PBwel is a globally recognised designer, manufacturer and supplier of temporary portable earthing, voltage detectors, Buchholz relays and electrical safety products.

With a heritage spanning over eighty years, and world-class experience in equipment designed for the safe maintenance of power systems, PBwel provides customers with high-quality service, reliable solutions and technical expertise.

 

Product enquiry form

Address(Required)
Would you like to be contacted by our team to arrange a free on-site demonstration and to find out more about this product?
This field is for validation purposes and should be left unchanged.

Or you can call the team using the below button