The Line End clamp (sometimes referred to as a phase or conductor clamp) is precision manufactured from a robust aluminium casting with stainless steel fittings.
The CE62 incorporates a stainless-steel jaw, which is spring-loaded to reduce application and removal time associated with clamps of the screw type. CE62 is suitable for a conductor range between 4mm and 20mm.
Three interconnected CE62 clamps can be loaded onto the Applicator Head for rapid, snap-on application to the conductors. Removal is again a quick action using the spike of the Applicator Head, by locating into the eye at the rear of the clamp and pulling firmly downwards.
| Clamping Diameter: | 4 - 20mm |
| Applied with: | DH1A or Applicator Head |
| Part Number: | EFD-16733 |
| Short Circuit Rating: | 12.5 kA/1s |
| Weight: | 0.44kg |
Get in touch with one of the team
P&B WEIR ELECTRICAL LTD
Unit 1, Leafield Way, Leafield Ind. Est. Corsham, Wiltshire,
SN13 9SW
P&B Weir Electrical Ltd
Unit 1, Leafield Way, Leafield Ind. Est. Corsham, Wiltshire, SN13 9SW
© PENTA 2023.
Registered Company Number: 10527362
VAT Number : GB 289 988 694
Registered in England & Wales
