Network Rail Case Study: The successful trial of the new
Low Voltage Earthing Kits from PBwel can be made to suit most applications and specific requirements. Single phase, 3-phase 3, 4 or 5 wire assemblies.
The PBwel Distribution Line Earthing kits can be fully customised depending upon requirements, illustrated are various standard kits for reference. Still, please contact us if your requirement is not shown specifically.
The LV kits can be provided for up to 5 cables (three Phases, Neutral and Earth Line End clamps), and are supplied with a Heavy Duty pvc Carry Bag for protection of the equipment. The length of the 50sqmm Leads usually 1.5m, although these can be made to any length/colour depending upon requirements.
Low Voltage Earthing Kits from PBwel can be made to suit most applications and specific requirements. Single-phase, 3-phase 3, 4 or 5 wire assemblies.
The Low Voltage Earthing Kits employ S9B conductor clamps fitted with pvc operating handles for overhead conductor sizes from 3.0 to 27.0mm diameter. Single-phase, 3-phase 3, 4 or 5 wire assemblies can be assembled using the appropriate number of clamps and interconnecting leads, to provide portable shorting kits.
The cable sheath is available in clear pvc or opaque orange Arctic grade pvc to protect the cable from corrosion or damage.
Each interconnecting lead is fitted with compression terminations, having pvc sleeves over the terminations and cable to provide mechanical support. The length of the interconnecting leads is usually 1.5m, but any length can be delivered to suit a particular application.
The pvc carrying bags are available to accommodate complete assemblies.