PENTA can supply Aluflex leads in any length required, in a range of sizes including 50sqmm, 120sqmm and 150sqmm. Standard Distribution Line Earthing kits utilise 50sqmm and 120sqmm Aluflex leads. 120sqmm is used for the phase leads, and the down-lead is generally 50sqmm. If your requirements are for a higher Short Circuit Rating than standard, please contact us for a recommendation.

The PENTA P&B Aluflex earthing leads are produced from multi-stranded, commercially pure aluminium wrapped with a layer of P.T.P. tape and covered with an extruded transparent pvc sheath.

Flexible clear pvc stress-relieving sleeves are fitted to prevent excessive wear around the compression joints. The earth end to line end clamp interconnecting lead has a 50sqmm nominal section area, terminated by PB50F type ferrule terminations.

Earth bonds are of a 120sqmm nominal section area terminated by PB120F palm type terminations. Flexible clear pvc stress-relieving sleeves are fitted to prevent excessive wear around the compression joints.

PENTA can offer training for maintenance on leads, or repair/replace leads as required. The Earth leads are wrapped with a layer of P.T.P. tape and covered with an extruded transparent pvc sheath. Flexible clear pvc stress-relieving sleeves are fitted to prevent excessive wear around the compression joints. The Earth End to Line End clamp interconnecting lead has a 50sqmm nominal section area, terminated by PB50F type ferrule terminations.